Tugas 4 Jarkom II (Teori)

Konfigurasi Router Dinamis

Desain jaringan :

Untuk konfigurasi routernya, kita menggunakan RIP untuk mengkoneksikan jaringan antar router.
Konfigurasinya adalah sebagai berikut :

• Router pertama

         --- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: n

Press RETURN to get started!

Router>ena

Router#conf T

Enter configuration commands, one per line.  End with CNTL/Z.

Router (config)#int fa0/0

Router (config-if)#ip address 192.5.5.1 255.255.255.0

Router (config-if)#no shut

Router (config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router (config-if)#exit

Router (config)#int fa1/0

Router (config-if)#ip address 205.7.5.1 255.255.255.0

Router (config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up

Router (config-if)#exit

Router(config)#int s2/0

Router (config-if)#ip address 201.100.11.1 255.255.255.0

Router (config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Router (config-if)#exit

Router (config)#router rip

Router (config-router)#version 2

Router (config-router)#network 192.5.5.1

Router (config-router)#network 205.7.5.1

Router (config-router)#network 201.100.11.1

Router (config-router)#^Z

Router #

%SYS-5-CONFIG_I: Configured from console by console

Router #wr mem

Building configuration...

[OK] 
Router #

• Router kedua

         --- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: n

Press RETURN to get started!

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router (config)#int fa0/0

Router (config-if)#ip address 219.17.100.1 255.255.255.0

Router (config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router (config-if)#exit

Router (config)#int s2/0

Router (config-if)#ip address 199.6.13.1 255.255.255.0

Router (config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Router (config-if)#exit

Router (config)#int s3/0

Router (config-if)#ip addres 201.100.11.2 255.255.255.0

Router (config-if)#clock rate 9600

Router (config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to up

Router (config-if)#exit

Router (config)#router rip

Router (config-router)#version 2

Router (config-router)#network 219.17.100.1

Router (config-router)#network 199.6.13.1

Router (config-router)#network 201.100.11.2

Router (config-router)#^Z

Router #

%SYS-5-CONFIG_I: Configured from console by console

Router #wr mem

Building configuration...

[OK] 

Router #

• Router ketiga

 

         --- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: n

Press RETURN to get started!

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router (config)#int fa0/0

Router (config-if)#ip address 223.8.151.1 255.255.255.0

Router (config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router (config-if)#exit

Router (config)#int s2/0

Router (config-if)#ip address 204.204.7.1 255.255.255.0

Router (config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Router (config-if)#exit

Router (config)#int s3/0

Router (config-if)#ip address 199.6.13.2 255.255.255.0

Router (config-if)#clock rate 9600

Router (config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to up

Router (config-if)#exit

Router (config)#router rip

Router (config-router)#version 2

Router (config-router)#network 223.8.151.1

Router (config-router)#network 204.204.7.1

Router (config-router)#network 199.6.13.2

Router (config-router)#^Z

Router #

%SYS-5-CONFIG_I: Configured from console by console

Router #wr mem

Building configuration...

[OK]

Router #

• Router keempat

         --- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: n

Press RETURN to get started!

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router (config)#int fa0/0

Router (config-if)#ip address 210.93.105.1 255.255.255.0

Router (config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router (config-if)#exit

Router (config)#int s3/0

Router (config-if)#ip address 204.204.7.2 255.255.255.0

Router (config-if)#clock rate 9600

Router (config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to up

Router (config-if)#exit

Router (config)#router rip

Router (config-router)#version 2

Router (config-router)#network 210.93.105.1

Router (config-router)#network 204.204.7.2

Router (config-router)#^Z

Router #

%SYS-5-CONFIG_I: Configured from console by console

Router #wr mem

Building configuration...

[OK] 

Router #

• Router kelima

         --- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: n

Press RETURN to get started!

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router (config)#int fa0/0

Router (config-if)#ip address 210.93.105.2 255.255.255.0

Router (config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router (config-if)#^Z

Router #

%SYS-5-CONFIG_I: Configured from console by console

Router #wr mem

Building configuration...

[OK] 

Router #

Hasil dari konfigurasi diatas adalah sebagai berikut

Untuk mengecek jaringan tersebut terkoneksi semua atau tidak, kita lakukan pinging lewat command prompt. Saya pilih jaringan yang akan di ping secara acak dan hasilnya seperti berikut :

Gambar di atas menunjukkan bahwa koneksi antar jaringan telah tersambung.

Demikian tugas ini dibuat semoga bermanfaat, dan mohon maaf apabila ada kesalahan di dalam penulisan.